3# Microstock Series - Nikon Creative Lighting System (CLS)

© Photographer: Braendan | Agency: Dreamstime.com

Off camera lighting is important to produce studio quality images. Such lighting will not cost you an arm and a leg in fact all you need is to think out of the box and be a little creative with what you have. Take the above image and the one below for example. If you don't look at the setup below can you guess the type of setup for this type of scene? It's actually simpler than you think.

© Photographer: Braendan | Agency: Dreamstime.com

With the setup above you have 4 different light source which can leverage upon; the SB600, the mirror is a very good reflector, the soft light from the balcony and from your camera fill light. Everything mentioned here is already available to you if you don't have a flash don't worry just use a florescent table lamp to replace the flash.

Tip 1: Pop up flash as CLS will contribute to the lights in your photography even in "--".You notice the light on the apple on the first image? the light coming from the front is a bit harsh and its one of the drawbacks of using Nikon built in flash as a CLS commander to trigger the SB600. Although the built in flash was set to "--" it still contributes to the scene. This happens when your camera is close enough to the subject e.g. 1 feet. or closer To counter this drawback you either get an SU-800 or the inexpensive SG-31R panel which will look something like the one below.

Tip 2: When you use a light meter you should use radio trigger or SU-800. This is because of the pre-flashes before the actual flash fires. You will never be able to get a correct exposure on your light meter. If you use Built-in flash, SB-800 or even SB-900 for CLS your light meter will go crazy.

P/S: My flickr site has notes on the setup you can have a look at it here.

BTW: If you find the information in this site useful please help me by visiting the sponsors of this site.